Learn how to Build your own Enviro Balsawood Surfboard with our woodwork short courses in Sydney!
Join our one-on-one class where you will build your own environmentally friendly surfboard to your requirements. This is a great escape and a mindful craft.
This class is hands-on! Prepare to get dusty while you learn step-by-step how to design and draw your board and build it under professional supervision and guidance from your tutor.
The board that you will build is made out of solid wood that can be glassed and surfed on (or hung on the wall just like in the 50s and 60s). There are also no restrictions to your shape, you can choose your preferred stringer layout from no stringers to 5 stringers in different arrangements.
All equipment will be supplied with the kit you can purchase from your tutor Mark. All necessary tools will be provided in a safe and clean environment.
By the end of the class, you will not only walk away with the knowledge of how to build a surfboard but also with your unique board in hand, a certificate of completion as well as some photos that were taken in class for good memories.
By the end of this DIY Balsawood Surfboard course, you should:
- Have an understanding of balsawood and the environment
- Know how mass-produced surfboards are impacting the environment
- Have used power and hand tools to achieve a great-looking wood board and one you can surf on or hang on the wall.
What will be covered in this DIY Balsawood Surfboard course?
- 11am to 11.30am – Introductory talk
- 11.30am to 12pm – Hand over of kits
- 12pm to 12.30pm – Layout of wood or foam and cutting wood and foam with the band saw
- 12.30pm to 1.30pm – Glue up blank or shape foam
- 1.30pm to 2.30pm – Remove clamps or glue on the balsa sheet to the bottom
- 2.30pm to 3.30pm – Draw plan shape or shape foam deck
- 3.30pm to 5pm – Cut out plan shape with a circular saw or glue on balsa sheet to the deck
- 11am to 12pm – Shaping bottom with an electric planer or cut plan shape to balsa sandwich
- 12am to 1pm – Shaping deck with an electric planer or glue on balsa bands/rails
- 1pm to 2pm – Sanding bottom, Shaping rails with a block plane
- 2pm to 3pm – Sanding rails with sanding blocks
- 3pm to 5pm - Finish sanding board talk about fins and glassing
You can walk away with your shaped board or join your tutor to glass your board (extra cost).
Who is this DIY Balsawood Surfboard course for?
This course is for beginners - no prior knowledge is required.
- Covered comfortable shoes.
- Old clothes because you may get glue or dust on them
- Bottle of water
- All necessary tools will be supplied
- Once enrolled, your tutor Mark will contact you to inform you about the available kit options as well as which kit would suit your needs. Kit prices range between $400 and $1550 depending on size and material (foam is also available). Please note your mobile number and email address will be shared with the tutor once enrolled.
- If you do not want to take a board home – then you still can join the class and learn how to build one. Consequently, the board will be kept at the workshop space after class.
Bring lunch or a snack. Alternatively, drive to Miranda Westfield (about a 5-minute drive).
- your emergency contact (name, relationship and contact phone number), and
- any special requirements (e.g. wheelchair access) if applicable
- Kits are optional.
- This is a one-on-one course.
- To ensure resources are ready for you at the start of your course, we ask you ideally to enrol at least one week before the course commences.
- All courses need a minimum number of students to run ("we try our hardest to get those"). If your course does not have enough students it will be cancelled before the commencement and you will be informed as early as possible.
